The listing, Mak Magic gas sever has ended.
Super Gas Saver
About the technology
The cooking gas is passed directly through powerful magnets, placed inside the device. This increases the excitation level of gas molecules, causing their de-clustering. When the gas now comes out of Gas Saver it burns with increased thermal efficiency. This unique process results in gas saving up to 41% until now the magnets were used to be placed outside the tube carrying gas which gave low efficiency of the gas saver. The innovative feature is that, the gas comes in physical contact with the powers packed magnets.
Installation of gas Saver: Domestic
1. Make sure that all the burner laps are closed.
2. Switch off the gas cylinder valve and remove the remove the regulator unit from the cylinder.
3. Remove the rubber tube from the burner and fit at one end of the unit marked IN.
4. Fit the 4” long rubber tube with its one end connected to the gas saver and the other with the burner.
5. Secure the rubber tube upto the ends of brass nipples, on both the sides of the gas saver.
6. Fix the regulator to the cylinder.
7. Switch on the gas cylinder valve.
8. Check all the points for gas leakage with soap water solution. Ensure that there is no leakage of gas.
9. Congratulation! You have installed the Gas Saver which will save up to 41% of your cooking gas month after month year after year.